Wanted: SCM50ASL or SCM100ASL (**BOUGHT NOW!)
5 posts
• Page 1 of 1
Wanted: SCM50ASL or SCM100ASL (**BOUGHT NOW!)
by audio_guy » Thu Jun 01, 2017 5:16 pm
Hi all,
Looking for a pair of active 50s or 100s. Not interested in tower models.
Pro or not - either works for me.
I can pick up from anywhere in the UK, potentially Europe too.
Cheers!
Looking for a pair of active 50s or 100s. Not interested in tower models.
Pro or not - either works for me.
I can pick up from anywhere in the UK, potentially Europe too.
Cheers!
Last edited by audio_guy on Sun Sep 17, 2017 11:19 pm, edited 1 time in total.
Re: Wanted: SCM50ASL or SCM100ASL
by audio_guy » Sun Sep 17, 2017 11:18 pm
Never mind - picked myself up a lovely pair of 100 ASLs today. So happy to be part of the ATC family now 
- darrenyeats
- Posts: 236
- Joined: Sat Nov 30, 2013 2:29 pm
Re: Wanted: SCM50ASL or SCM100ASL (**BOUGHT NOW!)
by darrenyeats » Mon Sep 18, 2017 10:23 am
Welcome!
Remember to follow all the ATC instructions when positioning them, especially 1 metre gap from side walls and an equilateral triangle. If you can't manage the 1m from side walls, then IME side wall treatments are necessary. Also good source components are important.
Remember to follow all the ATC instructions when positioning them, especially 1 metre gap from side walls and an equilateral triangle. If you can't manage the 1m from side walls, then IME side wall treatments are necessary. Also good source components are important.
Re: Wanted: SCM50ASL or SCM100ASL (**BOUGHT NOW!)
by audio_guy » Mon Sep 18, 2017 12:44 pm
Thanks for the welcome and the reminders Darren! 
I used 100s while I was at university for 4 years a little while ago, so I'm quite familiar with the positioning etc, and they'll be installed in a purpose built control room in my recording studio when construction is finished, so acoustic treatment and source components should be no problems at all haha.
I used 100s while I was at university for 4 years a little while ago, so I'm quite familiar with the positioning etc, and they'll be installed in a purpose built control room in my recording studio when construction is finished, so acoustic treatment and source components should be no problems at all haha.
- darrenyeats
- Posts: 236
- Joined: Sat Nov 30, 2013 2:29 pm
Re: Wanted: SCM50ASL or SCM100ASL (**BOUGHT NOW!)
by darrenyeats » Mon Sep 18, 2017 2:49 pm
That sounds great.
5 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 2 guests